ACEPOM317 series vibration meter is mainly used for mechanical equipment vibration displacement, velocity (intensity) and acceleration measurement. Using the instrument to get vibration value from bearing block, contrast with the international standard ISO10816, or use enterprise, machine standards. The current state of the equipment (fan, pump, compressor, motor, etc.) can be determined (good, careful or dangerous, etc.).This machine adopts anti-manual interference technology, which eliminates the jitter interference caused by the hand holding, so that the measured results of the hand holding vibrometer are consistent with those measured by us on the calibration source, and the measurement is more stable.

Main features：

1. With anti-manual interference technology, which eliminates the jitter interference caused by the hand holding, making the measurement more stable.

2. Ergonomic shape design, with good feel, easy to operate, low power consumption, reliable performance, beautiful shape, easy to use and carry characteristics

3. Adopt high-definition display screen, in strong light and backlight environment can also clearly read the value.

4. Manufactured according to ISO10816, the measuring value can be compared with the international vibration intensity standard to directly judge the running state of your machine.

5. High reliability of parallel shear and annular shear acceleration sensors.

6. The vibration sensor and the host are connected in an integrated or split way.

7. The split type is connected with the main machine by high strength tensile spiral cable.

8. It is suitable for vibration measurement of all kinds of machinery in industrial and mining enterprises

Specification：

Acceleration probe：Piezoelectric shear acceleration probe

Measuring range：　Acceleration:   0～199.9m/s2

Velocity:   0～199.9 mm/s

         Displacement:   0～1999 μm

Measurement accuracy:   ±5％

Frequency range:   Acceleration：10Hz～1kHz

Velocity：10Hz～1kHz

Displacement：10Hz～1kHz

Display:   Digital display, update speed 1 second, press the measurement key to measure, release the key to hold.

Power:   1×9V battery. Continuous working time is about 25 hours.

Low voltage indication:   Battery voltage below 5.5V, low voltage indication

Data hold:   After releasing the measurement key, the data is held for one minute.

Indicate fluctuation: Indicate fluctuation is not more than one digit.

Automatic shutdown time: 1 minute

Atmospheric pressure: 75~ 106kPa

Screen size: 50*13mm

Environment：-10～50℃，<90％RH

Size :   185(H)×68(H)×30(D) mm

Weight : 180g

ACEPOM317A standard configuration：

1·Host   1

2·Battery 1

3·Belt 1

4·Manual 1

ACEPOM317B standard configuration：

1·Host   1

2·Battery 1

3.Probe 1

4.Magnets block 1

5.Probe cable 1

6.Belt 1

7.Manual 1

Catalog：

Attachments can be downloaded.

ACEPOM317B Brochure