Four row cylindrical roller bearings are usually used to withstand rolling force. The inner rings of these bearings are fitted on the roll neck with interference fit. Because of rapid wear, heavy load and serious pollution, rolls must be replaced frequently. Inevitably, the inner rings need to be disassembled and then loaded onto the new rolls.

Just three minutes.

Using ACEPOM162 series bearing induction disassembler, the inner ring is heated before the roll neck is heated. The inner ring can be easily removed from the roll neck. Even for relatively large inner rings, it takes only two to three minutes to complete the operation. Induction heater can also be used as installation equipment. It becomes a real worry-free job to put the heated bearing inner ring on the roll neck. The time required for disassembling the inner ring of the bearing is greatly reduced.

Advantages of ACEPOM162 Series Bearing Induction Disassembler:

1. Functions: fast heating speed, easy operation, temperature display, time display can control the heating process;

2. Quality: The imported cold-rolled silicon steel sheet and pure copper induction coil are first used in China, which have fast conduction and high heating efficiency.

3. Appearance: Humanized design, exquisite craftsmanship, beautiful atmosphere;

4. Environmental protection: nameless fire, pollution-free, low noise, no accident hidden danger;

5. Heatable sealed bearings;

6. Movable heating coil or handheld coil can be selected to make it more convenient to use.

Parametric performance:

Only one person can operate it.

Increased production time

Ensure that bearings can be reused

备注：以上参数仅供参考，此系列拆卸器需要根据具体尺寸定做.