ZNBX box type bearing induction installation and disassembly device is used in rolling mills, railway departs, ports, docks and other industrial and mining enterprises. A new generation of products for thermal disassembly and installation of bearing inner rings, retaining rings, sealing rings, gear couplings, etc. The product applies the principle of electromagnetic induction to generate an induced current in the inner ring of the bearing to expand it, thus creating a gap at the mating place to achieve the purpose of easy disassembly. Because the induction heating is rapid, uniform, clean, pollution-free, high heating quality, and to ensure that the bearing is not damaged, this advanced installation and disassembly method is gradually replacing baking, oil cooking and other methods.

ZNBX box type bearing induction installation and disassembly device Main structure: The machine is composed of the main control cabinet, stainless steel disassembly ring and other parts.

Disassembly use and operation:

1. Connect the control cabinet to the controlled power supply;
2. Connect the control cabinet with the disassembly ring with a wire;
3, close the control switch, the voltmeter should be indicated at this time;
4. Put the disassembly ring on the workpiece;
5, adjust the required heating time, press the start button, heating starts. When the workpiece is heated to the required time, the host will automatically turn off the power or press the stop switch;
6, after the heating is finished, take out the disassembling ring and remove the workpiece;
Note:
1, this series of bearing induction disassembly ** by the user to provide the heating workpiece specifications;
2, take out the workpiece to use heat insulation gloves;
3. Remove the heating parts of the disassembly ring after the host is powered off.

Installation, use and operation:

1. Connect the control cabinet to the controlled power supply;
2. Connect the control cabinet with the disassembly ring with a wire;
3, close the control switch, the voltmeter should be indicated at this time;
4, put the workpiece into the disassembly ring;
5, adjust the required heating time, press the start button, heating starts. When the workpiece is heated to the required time, the host will automatically turn off the power or press the stop switch;
6. After heating, remove the workpiece and install it on the shaft;