Bearing fault detection instrument is a field hand-held testing instrument integrating vibration measurement, bearing state detection and temperature detection. With functions of data collection and processing, numerical display and storage, it is very suitable for fault detection of rotating equipment in factories. It is convenient for monitoring personnel to find potential problems in advance and provide maintenance guidance.Among them, the intelligent bearing condition detection method, which is used for bearing fault detection, does not need any professional knowledge and can realize the intelligent evaluation of bearing condition. It has been popularized in many industries and achieved good results.

Main Features

Vibration test provides measurement of acceleration, velocity and displacement signals. Based on advanced digital signal processing technology, the results are stable and reliable.

The measuring unit can be switched intelligently according to the size of the value, making the measuring range wider.

The instrument can be flexibly configured to adjust the sensitivity coefficient of vibration sensor and infrared temperature emissivity according to the actual situation.The temperature measurement provides a basis for comprehensive analysis of the health condition of the equipment. The temperature measurement range can be up to - 40°C~240°C.

The data saving function can save up to 50 pieces of data ;

The instrument will automatically measure whether the sensor is connected properly and give a prompt;

Power saving, a full charging will support over 10h continuously work;

According to the parameter comes from Vibration high frequency filtering, it will automatically make a evaluation of bearing condition.

Function Mode

l Vibration inspection

Detect the vibration with low frequency filter and translate it to vibration character values : velocity, displacement and acceleration;

l Rolling bearing status detection

High frequency vibration detection is carried out to extract the characteristic value of the rolling bearing state according to the vibration frequency range caused by the bearing damage, and quantify the rolling bearing state index of the tested equipment

     l Temperature detection

          Detect the facility temperature to support the general facility status analysis

l System set up

Set sensor sensitivity coefficient, preheating time, system time, sensor GUI switch, backlight switch, emissivity, system language, English switch, etc.

l Charging

Built-in rechargeable lithium battery

Auxiliary Function

l Sensor disconnect test

A sign of disconnecting will show up on the screen when the sensor is not well connected.

l Power saving function

Without any operation in 5 min, the instrument will enter sleep state, press any button to continue. Without any operation in 30 min, the instrument will automatically shut down.

l Charging instruction

Operated according to the safety specification of shackle hydrogen battery when charging, red light means charging, green light means full charged. The instrument is equipped with automatic power failure function.

Measured characteristic values: effective value, peak value, peak-to-peak value, LQ value

Vibration frequency range: 10Hz~1KHz

*Instrument parameters Size:169*81*31mm

Stand-alone weight: 360g (including accessories)

Display: 2.1 inches with backlight

Memory: 128KBytes

Communication method: USB

*Battery

Battery Type: 1250mAh

Voltage: Standard 4.8V (5.4VMAX)

*Environment

Operating temperature range: -10°C~50°C

Storage temperature range: -30°C~80°C

Humidity: ≤85% (25°C)

Standard configuration:

Host 1

Acceleration sensor 1

1.2m sensor cable 1

High magnetic head 1 Host charger 1

User Manual 1