Induction bearing heater SMHL-1/2/3/4/5 Electromagnetic heating technology Hot disassembly heater
Induction bearing heater SMHL-1/2/3/4/5 Electromagnetic heating technology Hot disassembly heater
- Detail
- Parameters
SMHL series bearing heater parameter performance:
Adjust power, auto erase
Environmental protection, no soot pollution
Save money, save time, save electricity, save oil and improve assembly quality
Reliable, simple operation, uniform heating, no fire danger
Selection form of SMHL series bearing heater:
Model | SMHL-1 | SMHL-2 | SMHL-3 | SMHL-4 | SMHL-5 | SMHL-6 |
Power (KVA) | 2.2 | 3.5 | 7.5 | 20 | 60 | 75 |
Voltage (V) | 220 | 380 | 380 | 380 | 380 | 380 |
ID Ø: mm (mm) | >30 | >70 | >100 | >160 | >230 | >300 |
Max. OD Ø: (mm) | 250 | 360 | 500 | 700 | 800 | 1100 |
Max. width: (mm) | 120 | 150 | 180 | 220 | 280 | 350 |
SMHL series bearing heater operation guide:
1, yoke will be placed on the end of the column.
2. Plug the plug into the power outlet of the control switch.
3, check the grounding wire is good, energized by the test pencil test.
4, press the start button, the host power on.
5, check the yoke should be no voltage to the ground.
6, press the stop button, the main machine power failure, stop heating.
7, according to the different specifications of the bearing or other items, choose different sets of yoke, the yoke on the top surface of the host, should be smooth.
8, heating, the sensor should be inserted into the "sensing socket", and the sensor close to the heating workpiece.
9. When the bearings are heated to the desired temperature, they will automatically turn off the power supply or press the stop switch.
10, stop heating, move the yoke to the left or right, remove the bearing.
1, if repeated use, uninterrupted heating bearings, bearings will only need the processed and then set into the yoke, click on the start button.
odel | SMHL-1 | SMHL-2 | SMHL-3 | SMHL-4 | SMHL-5 | SMHL-6 |
Power (KVA) | 2.2 | 3.5 | 7.5 | 20 | 60 | 75 |
Voltage (V) | 220 | 380 | 380 | 380 | 380 | 380 |
ID Ø: mm (mm) | >30 | >70 | >100 | >160 | >230 | >300 |
Max. OD Ø: (mm) | 250 | 360 | 500 | 700 | 800 | 1100 |
Max. width: (mm) | 120 | 150 | 180 | 220 | 280 | 350 |
SMHL series bearing heater operation guide:
1, yoke will be placed on the end of the column.
2. Plug the plug into the power outlet of the control switch.
3, check the grounding wire is good, energized by the test pencil test.
4, press the start button, the host power on.
5, check the yoke should be no voltage to the ground.
6, press the stop button, the main machine power failure, stop heating.
7, according to the different specifications of the bearing or other items, choose different sets of yoke, the yoke on the top surface of the host, should be smooth.
8, heating, the sensor should be inserted into the "sensing socket", and the sensor close to the heating workpiece.
9. When the bearings are heated to the desired temperature, they will automatically turn off the power supply or press the stop switch.
10, stop heating, move the yoke to the left or right, remove the bearing.
1, if repeated use, uninterrupted heating bearings, bearings will only need the processed and then set into the yoke, click on the start button.
