Hydraulic puller kit TMHC 110E versatile puller kit facilitates safe and easy dismounting
Hydraulic puller kit TMHC 110E versatile puller kit facilitates safe and easy dismounting
- Detail
- Parameters
Powerful combination of a jaw and strong back puller
The SKF TMHC 110E is a hydraulic puller kit, which combines a jaw puller and a strong back puller with up to 100 kN (11.2 ton US) pulling power. The versatile puller kit facilitates safe and easy dismounting in a variety of applications.
A versatile puller kit facilitates safe and easy dismounting in a variety of applications
Hydraulic spindle facilitates easy and quick dismounting
High load rating of 100 kN (11.2 US ton)
The strong back puller includes two different arm lengths for maximum reach of 120 mm (4.7 in.)
The jaw puller can be assembled as a three-arm or two-arm puller depending on the space and demands of the application
The firm grip of the strong back puller behind the bearing’s inner ring reduces the force required to dismount the bearing
Supplied with extension rods to allow quick adaptation to pulling lengths up to 245 mm (9.6 in.)
The spring-loaded centre point of the hydraulic spindle allows easy puller centring minimizing the risk of shaft damage
| Designation | TMHC 110E | |
| Description | Advanced hydraulic puller kit | |
| General | Contents | 1 x arm-assembly stand |
| 3 x arms, set 1 (TMHP10E-9) | ||
| 3 x arms, set 2 (TMHP10E-10) | ||
| 1 x separator set | ||
| 1 x beam | ||
| 2 x main rods | ||
| 2 x extension rods, 125 mm (4.9 in) | ||
| 1 x hydraulic spindle TMHS 100 | ||
| 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) | ||
| 1 x nosepiece with centre point for hydraulic spindle | ||
| Maximum stroke | 80 mm (3.1 in) | |
| Nominal working force | 100 kN (11.2 US ton force) | |
| Weight | 13,5 kg (29.8 lb) | |
| Cycle life hydraulic cylinder | Minimum 5000 cycles up to 100 kN (11.2 US ton force) | |
| Threading hydraulic cylinder | UN 1½'' x 16 tpi | |
| Safety valve setting hydraulic cylinder | 105 kN (11.8 US ton force) | |
| Carrying case dimensions | 580 x 410 x 70 mm (23 x 16 x 2.8 in) | |
| Jaw puller | Effective arms length, arms set 1 (TMHP10E-9) | 65 mm (2.5 in) |
| Width of grip, arms set 1 | 50-110 mm (2-4.3 in) | |
Claw height | 8 mm (0.3 in) | |
| Effective arms length, arms set 2 (TMHP10E-10) | 115 mm (4.5 in) | |
| Width of grip, arms set 2 | 75-170 mm (2.9-6.7 in) | |
| Claw height | 8 mm (0.3 in) | |
| Strong back puller | Maximum reach | 250 mm (9.8 in) |
| Shaft diameter range | 20 - 100 mm (0.8 - 4 in) |
