British vibration meter Professional manufacturer LC210AS Hand-held contact used to measure
British vibration meter Professional manufacturer LC210AS Hand-held contact used to measure
- Detail
- Parameters
Vibration meter Features
Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc.
Vibration meter SPECIFICATION | |
Vibration Pickup | Piezoelectric Ceramic Accelerometer(shear-type) |
Acceleration | 0.1~199.9m/s2 |
Velocity | 0.1~199.9m/s |
Displacement | 0.001~1.999mm |
Acceleration Frequency Range | 10HZ~1KHZ(LO) 1KHZ~15KHZ(HI) |
Velocity Frequency Range | 10HZ~1KHZ |
Displacement Frequency Range | 10HZ~1KHZ |
Accuracy | ±5%H±2digits |
Temperature Measurement | √ |
Maximum Locking | √ |
Temperature Measurement | √ |
℃℉ Selection | √ |
PACKING INFORMATION | |
Power | 9V Alkaline battery |
Product Net Weight | 282g |
Product Size | 221*66*33mm |
Packing | Aluminium box |
Standard Quantity Per Carton | 40PCS |
Standard Carton Size | 52.5*40.0*49.0cm |
Standard Carton Gross Weight | 12.5KG |
There aremore than 10years for ACEPOM Instruments has been in the field of Bearing induction heater and Vibration meter.We guarantee a fast,safe and controlled way to heat up the bearings,bushings,gears,pulleys,couplings or other parts with our continuous innovition in technology.
ACEPOM Instrument,the pioneers in the use of induction applications.Compared with traditional heating methods,the advantages of ACEPOM induction heaters are as fallows:
Fast and controllable heating process
Safe heating process
Only workpiece is heated
No messing around with dangerous hot oil
No risk of(local)over heating
Suitable for ee or zz bearings(no risk of grease leakage)
Can be used to pre-lubricate bearings
Compared with the similar products,the advantages of ACEPOM induction heaters are as follows:
Fast heating process through high output,Cos phi>0.8,
Adopting the frequency conversion technology,and making to heat the small workpiece is possible,at the same time,solving the problem of heating the blind holes in aluminium workpiece.
Ensure an equal temperature all over the part(inner and outer ring)
All heaters are continually woking without any optional cooling systems.
