Coating thickness gauge ACEPOM611
Coating thickness gauge ACEPOM611
- Detail
- Parameters
The coating thickness measuring instrument ACEPOM611 adopts magnetic and eddy current two measuring methods, which can nondestructive detect the thickness of non_magnetic covering layer on magnetic metal matrix (such as aluminum, chromium, copper, zinc, tin, rubber, paint, etc.).And the thickness of the non_conductive insulation covering layer on the non_magnetic metal matrix (such as rubber, plastic, paint, oxide film on aluminum, copper, zinc, tin, etc.).
● one-key operation;
● integrated design, smaller size.
Parameter：
Probe | ACEPOM611A | ACEPOM611B | ACEPOM611C | |
Probe type | F1 | N1 | F1/N1 | |
Work principle | Magnetic induction | Eddy current | Magnetic induction/eddy current | |
Measurement range | 0~1250μm | |||
Resolution | 1μm | |||
Error value | Single point calibration | ±（3%H+1） | ||
Double point calibration | ±[（1~3%)H+1] | |||
Work condition | Minimum radius of curvature mm | Convex 1.5、concave 20 | ||
Minimum area diameter mm | Φ10 | |||
Basic critical thickness mm | 0.5 | |||
Work environment | Temperature | 0~40℃ | ||
Humidity | 20%~90% | |||
Power | AAA Alkaline batteries1.5V× 4 | |||
Size | 150×55.5×23mm（Host） | |||
Weight | 120g | |||
The standard configuration | Main engine (built-in probe), standard test piece, matrix, AAA alkaline battery | |||
