Portable dynamic balancer & vibration analyzer ACEPOM329

ACEPOM329 hand_held field dynamic balance and vibration analyzer adopts embedded computer technology and dynamic balance technology, and has many functions such as field vibration data measurement, vibration analysis and single and double side dynamic balance, which is simple and easy to use.It is specially developed for field portable application, which not only meets the requirements of portable collection, but also realizes the powerful functions of field data collection and equipment fault analysis.Has the very high cost performance!It is an ideal tool for industrial and mining enterprises to predict maintenance, especially for fans, motors and other equipment manufacturers and vibration technical service organizations.

Main features:

Embedded computer technology and dynamic balancing technology;

It also has many functions such as field vibration data measurement, vibration analysis, single and double side dynamic balance, bearing detection and expert fault diagnosis.

The process is simple and optimized, and the user can quickly master the use of the instrument.

Support touch screen and double function operation;

Small size, light weight, compact and portable;

3.7' large screen LCD display, high resolution;

Large 8G storage capacity, can meet the requirements of large capacity data collection;

Abundant sub_functions: vibration meter, tachometer, waveform collection, axis track, data playback, path data collection, signal simulation, measurement point management, vector decomposition and synthesis.

Main functions:

Single and double-sided dynamic balance measurement can be carried out;

Dual channel synchronous measurement can be carried out for complex mechanical fault diagnosis.

Speed of measurable equipment, vector decomposition and synthesis, path data acquisition, axis trajectory analysis;

Various parameters of vibration velocity, acceleration and displacement can be collected.

The spectrum and time domain waveform of single and double channels can be measured.

The total value trend can be carried out to observe the total value fluctuation curve of the equipment under different working conditions.

Dustproof and waterproof sputtering, more durable, can be effectively protected in harsh conditions;

The analysis frequency band is wide, the calculation ability is strong, the analysis range is 0 ~ 50KHz, the instrument can directly calculate the double channel 6400 line FFT, can meet the accurate analysis complex machine (such as high-speed gear) vibration requirements;

Flexible collection parameters setting, high pass filtering, low pass filtering, sampling length, sampling frequency and other parameters can be set freely, to meet the needs of state data collection of various mechanical equipment.

Technical parameters:

Storage capacity: 8 GB

LCD: 3.7 'true color LCD screen, 640 x 480 pixels

Touch screen: full screen touch operation

Battery: lithium battery, working time BBB 0 8 hours

Operating temperature range :(-10 ~ 50) ℃

Vibration data acquisition: 1/2 vibration channels + 1 rotational speed channel;

Communications: USB

Humidity: 95% RH non condensing

Acquisition parameters: hardware integration processing (no integration, primary integration, secondary integration), can be collected acceleration, speed, displacement;

Hardware programmable gain amplifier: automatic adjustment, effectively improve the signal to noise ratio;

Simultaneous protection: hardware multi_channel sampling at the same time to ensure that the multi_channel vibration signal is absolutely in phase;

Independent signal processing: each channel is absolutely independent signal processing, to ensure the independence of each channel signal, to eliminate inter-channel interference;

Anti-mixing filtering: automatic adjustment of hardware;

Dynamic range: 96dB parameter setting;

Sampling frequency, high-pass filtering, low-pass filtering and sampling length can be set arbitrarily;

Spectrum analysis: spectrum types: amplitude spectrum, power spectrum, phase spectrum, cepstrum, etc

Failure analysis of mechanical equipment:

According to the actual situation, through a variety of analysis methods, can turn a subclass of diagnostic equipments fault (base of the loose, unbalanced, shaft bending, axial crack, resonance, surge, oil film vortex, oil film oscillation, rotating stall, the rotor and stationary pieces of friction, rotor interference fit interference, seal gap and instability), bearing such failure (bearing wear, bearing pitting, bearing oil shortage), gear box fault class (gear eccentric wear, gear, gear pitch error is too large), etc. All kinds of mechanical failure.

Monitoring the high_frequency pulse signal is the most basic requirement for the flow bearing and gear system, which provides a special dimensionless index detection, so that you can quickly confirm whether there is a fault in the rolling bearing base gear system and determine the extent of the fault.

Optional software:

On-site dynamic balancing software:

With single and double field dynamic balancing function.

Include all the functions you need to move quickly and effectively to balance the corrective process.

Easy to operate: built-in software guides you through vibration analysis and field dynamic balancing.

Bearing fault diagnosis software: bearing fault (bearing wear, bearing pitting, bearing oil), gearbox fault (gear wear, gear eccentricity, gear pitch error is too large) and other mechanical faults.Monitoring the high_frequency pulse signal is the most basic requirement for the flow bearing and gear system, which provides a special dimensionless index detection, so that you can quickly confirm whether there is a fault in the rolling bearing base gear system and determine the extent of the fault.