The double-cone type electromagnetic induction heater ACEPOM-GEMINI has high efficiency, and the small workpiece can heated to 110 degrees within 515s. It can match the beat of the manipulator and is suitable for assembly line production. The doublecone type electromagnetic induction heater ACEPOM-GEMINI can also be reformed to be suitable for robot assembly, heating and connecting parts, such as: Bearing, inner hole, camshaft assembly, etc. Bearing diameter range: 20~130mm, power: 2.5KW.

Heating case: it only takes 30 seconds for a bearing with an inner diameter of 50mm to beheated to 90 degrees.

Features：

✓ The two heating cones can be replaced;

✓ Customizatble for bearing inner ring size;

✓ Easy to use;

✓ Compact, strong and insulated;

✓ Lighter and portable;

✓ Reliable and flexible;

✓ Safe and clean;

✓ Automatical demagnetization;

✓ High efficiency;

Poka-Yoke

✓ The heating cones are made of high temperature material (260℃）；

✓ The cones can be used in turns, to cool down adequentely;

✓ In order to avoid the user mistakenly install the sensor and lead to uncontrolled heating, ACEPOM-GEMINI's program stops heating when sensors detect no change in temperature;

Optimized heating mode：

       •   Temperature and time control: The temperature and time can be set, and the setting results can be remembered.
       •   Heat preservation function: keep the workpiece at the preset temperature after heating finished.
       •   With the storage mode on the control panel, it can intelligently remember the last heating mode and heating requirements. The user only needs to press the storage key after the end of heating to record the heating requirements, and there is no need to reset the next startup.