Small induction heater TIH030M heating smaller bearings safely and at lower power consumption
Small induction heater TIH030M heating smaller bearings safely and at lower power consumption
- Detail
- Parameters
Small induction heater
High heating capacity of up to 40 kg bearing
The small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The bearing heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The induction heating system is supplied standard with three yokes and is available in two executions: 230V/50-60Hz and 100-110V/50-60Hz.
Features and benefits
Compact lightweight design; just 20,9 kg (46.0 lb) facilitating portability
2step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
Automatic demagnetisation
Technical data | |
Designation | TIH 030M/230V |
TIH 030M/110V | |
Description | Induction heater |
m20performance | 28 kg (61.7 lb) |
Voltage, V/Hz | 230V/50-60Hz or 100-110V/50-60Hz |
Bearing: | |
- Maximum weight | 40 kg (88 lb) |
- Maximum bore diameter | 20 - 300 mm (0.8 - 11.8 in.) |
Temperature control: | |
- Range | 0 - 250 °C (32 - 482 °F) |
- Magnetic probe | Yes, K-type |
- Accuracy (electronics) | ± 2 °C (± 3.6 °F) |
Time control: | |
- Range | 0 - 60 minutes |
- Accuracy | ± 0,01 sec. |
Maximum heating temperature* | 250°C (482 °F) |
Thermometer mode | Yes |
Bearing mode | Yes |
Power setting | 2-step; 50% or 100% |
Demagnetisation according to norms (automatic) | Yes (<2 A/cm) |
Can heat sealed bearings | Yes |
Can heat pre-greased bearings | Yes |
Error guiding codes | Yes |
Thermal overload protection | Yes |
Control panel | Control panel and LED display integrated in remote control |
Operating area (w x h) | 100 x 135 mm (3.9 x 5.3 in.) |
Coil diameter | 95 mm (3.7 in.) |
Dimensions (w x d x h) | 450 x 195 x 210 mm (17.7 x 7.6 x 8.2 in.) |
Total weight, including yokes | 20,9 kg (46.0 lb) |
Maximum power consumption | 2,0 kVA |
Standard yokes | 45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in.) for heating bearings with bore diameter of 65 mm (2.6 in.) and larger. |
28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in.) for heating bearings with bore diameter of 40 mm (1.6 in.) and larger. | |
14 x 14 x 215 mm (0.5 x 0.5 x 8.4 in.) for heating bearings with bore diameter of 20 mm (0.8 in.) and larger | |
Core cross section | 45 x 45 mm (1.7 x 1.7 in.) |
Bearing support arms | Yes, foldable |
Yoke storage | Yes, internal integrated in foldable bearing support arms |
Cooling fan | No |
Swivel arm | No |
Housing material | Steel and glass filled polyamide |
* Depending on bearing or work piece weight. For higher temperatures, please contact us. | |
