The separated vibrometer UT312 is a hand-held integrated vibrometer consisting of an acceleration sensor and a digital measurement display circuit. It is mainly used to measure the vibration displacement, velocity and acceleration of mechanical equipment. By using the data measured by the instrument, comparing with the international/national metrological verification regulations of the working vibrometer, or using the standards of enterprises and machines, the current state (good, attention or danger) of the equipment (fan, pump, compressor, motor, etc.) can be determined.

It can be widely used in mechanical manufacturing, electric power, petrochemical industry, metallurgy, aerospace and other fields. As a measuring tool for purchase, inspection, operation monitoring and maintenance of rotating machinery and equipment, it is an ideal spot checker.

basic function

The frequency response range of vibration acceleration (O-P) is 0.1-199.9m/s: 10-1500Hz, and the amplitude error is <5%.

Linear error of amplitude: <2.0m/s, <10%, >2.0m/s, <5%

Vibration velocity (RMS) ranges from 0.1 mm/s to 199.9 mm/s: 10-1500Hz, and amplitude error: <5%

Linear error of amplitude: <2.0mm/s, <10%;>2.0mm/s, <5%.

Frequency response range of vibration displacement (P-P) 1-1999 micron: 10-500 Hz, amplitude error: <5%

Linear error of amplitude: <20um,<10%;>20um,<5%

Special functions

Data retention

Low Voltage Tip

Automatic shutdown (automatic shutdown one minute after release of test button)

Display mode digital display.

The battery life is measured continuously for more than 20 hours.

* Big Display 1999

General characteristics

Battery 6F229V

Fuselage color red + grey

Fuselage weight 230g (including batteries)

Fuselage size 185 x 68 x 30 mm

Standard accessories, bags, batteries

Standard packaging color boxes, instructions, warranty cards

Standard packing quantity 40 sets

Standard packing size 600mm x 370mm x 474mm