Belt alignment tool TKBA40 for V-belt pulley alignment
Belt alignment tool TKBA40 for V-belt pulley alignment
- Detail
- Parameters
Belt alignment tool TKBA 40
Highly accurate tool for V-belt pulley alignment
The TKBA 40 aligns Vbelt pulleys in the grooves. Vguides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laseremitting unit and a receiver unit, the belt alignment tool is easy and fast to attach. The threedimensional target area on the receiver unit allows the easy detection of misalignment as well as its nature. Horizontal, vertical, parallel or a combination of all three.
Powerful magnets allow fast and easy attachment
Three-dimensional target area simplifies the alignment process
Facilitates simultaneous adjustment of tension and alignment
V-guides facilitate the alignment of a wide range of V-belt pulleys
Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
A maximum operating distance of 6 m (20 ft) accommodates many applications
Special side adaptor allowing alignment of multi-ribbed and timing belt pulleys as well as sprockets is available as accessory
| Designation | TKBA 40 | |
| Type of laser | Red laser diode | |
| Laser | 1x Built-in class 2 laser, <1 mW, 632 nm | |
| Laser line length | 3 m at 2 m (9.8 ft at 6.6 ft) | |
| Measurement accuracy angular | Better than 0,2° | |
| Measurement accuracy offset | Better than 0,5 mm (0.02 in.) | |
| Measurement distance | 50 mm to 6 000 mm (2 in. to 20 ft) | |
| Control | Laser on/off switch | |
| Housing material | Extruded aluminium | |
| Dimensions | Transmitter unit | 70 x 74 x 61 mm (2.8 x 2.9 x 2.4 in.) |
| Receiver unit | 96 x 74 x 61 mm (3.8 x 2.9 x 2.4 in.) | |
| Reflector dimensions | N/A | |
| Weight | Transmitter unit | 320 g (0.7 lbs) |
| Receiver unit | 320 g (0.7 lbs) | |
| Mounting | Magnetic, groove mounted (optional side adapter TMEB A2) | |
| V-guides | Size 1: 22 mm, short rods (3x pairs) | |
| Size 2: 22 mm, long rods (3x pairs) | ||
| Size 3: 40 mm, short rods (3x pairs) | ||
| Size 4: 40 mm, long rods (3x pairs) | ||
| Battery | 2x AAA Alkaline type ICE LR03 | |
| Operation time | 20 hours continuous operation | |
| Carrying case dimensions | 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in) | |
| Total weight (incl. case | 1.3 kg (2.8 lbs) | |
| Operating temperature | 0 to 40 °C (32 to 104 °F) | |
| Storage temperature | –20 to +65 °C (–4 to +150 °F) | |
| Relative humidity | 10 to 90% RH non-condensing | |
| IP rating | IP 40 | |
| Calibration certificate | Valid for two years | |
| Case contents | 1x TKBA 40 transmitter unit | |
| 1x TKBA 40 receiver unit | ||
| 2x AAA batteries | ||
| 4x sizes of V-guides, 3x of each size | ||
| 1x Printed instructions for use | ||
| 1x Calibration certificate |
| Designation | Description |
| TKBA G2 | Set of V-guide with guides (each 3 pcs): 22mm short, 22mm long, 40mm short, 40mm long |
| TMEB A2 | Magnetic side adapter for aligning chain sprockets and timing and ribbed belts, pulleys |
| Designation | Description |
| TKBA 40-CA | Toolcase with inlay for TKBA 40 |
