Belt alignment tool TKBA20/11/21/31 Powerful tool for pulley sprocket alignment
Belt alignment tool TKBA20/11/21/31 Powerful tool for pulley sprocket alignment
- Detail
- Parameters
The SKF Belt Alignment Tool TKBA 20 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.
Powerful magnets for fast and easy attachment
Facilitates simultaneous adjustment of tension and alignment
Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
Highly visible green laser for outdoor usage in sunny conditions with measurement distances up to 6 m (20 ft)
Sturdy aluminium housings help ensure assembly stability and accuracy during the alignment process
TECHNICAL DATA TKBA 20
| Designation | TKBA 20 | |
| Type of laser | Green laser diode | |
| Laser | 1x Built-in class 2 laser, <1 mW, 532 nm | |
| Laser line length | 2 m at 2 m (6.6 ft at 6.6 ft) | |
| Measurement accuracy angular | Better than 0,02° at 2 m (6.6 ft) | |
| Measurement accuracy offset | Better than 0,5 mm (0.02 in.) | |
| Measurement distance | 50 mm to 6 000 mm (2 in. to 20 ft) | |
| Control | Laser on/off rocker switch | |
| Housing material | Aluminum, powder coat finish | |
| Dimensions | Transmitter unit | 169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.) |
| Receiver unit | 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.) | |
| Reflector dimensions | 22 x 32 mm (0.9 x 1.3 in.) | |
| Weight | Transmitter unit | 365 g (0.8 lbs) |
| Receiver unit | 340 g (0.7 lbs) | |
| Mounting | Magnetic, side mounted | |
| V-guides | N/A | |
| Battery | 2x AAA Alkaline type IEC LR03 | |
| Operation time | 8 hours continuous operation | |
| Carrying case dimensions | 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in.) | |
| Total weight (incl. case | 1,3 kg (2.9 lbs) | |
| Operating temperature | 0 to 40 °C (32 to 104 °F) | |
| Storage temperature | –20 to +60 °C (–4 to +140 °F) | |
| Relative humidity | 10 to 90% RH non-condensing | |
| IP rating | IP 40 | |
| Calibration certificate | Valid for two years | |
| Case contents | 1x TKBA 20 transmitter unit | |
| 1x TKBA 20 receiver unit | ||
| 2x AAA batteries | ||
| 1x Printed instructions for use | ||
| 1x Calibration certificate |
